Skip to content
Monday – Friday: 7 a.m. – 5 p.m.Licensed Irrigator · TX Lic. 000000VerifyBackflow Prevention Assembly Tester · TX Lic. 000000Verify
1 more license
  • Licensed Irrigator · TX Lic. 000000Verify
  • Backflow Prevention Assembly Tester · TX Lic. 000000Verify
(512) 555-0101

Services

What gets fixed, and what doesn't

Repair and testing for systems already in the ground, all by the same licensed irrigator.

  • Sprinkler heads and nozzles

    Broken, sunk, clogged or spraying the wrong way: replaced or adjusted so the spray reaches the grass and not the street.

    • Pop-up bodies and nozzles

    • Rotors and spray heads

    • Arc and distance reset

  • Valves and wire

    A zone that won't turn on or won't turn off is usually a valve, a solenoid or a break in the wire. Roderick traces it from the controller to the valve box.

    • Zone valves and solenoids

    • Wire faults and splices

    • Valve box repair

  • Controllers and sensors

    Replace or reprogram a controller, add a rain or freeze sensor, and set run times to your city's watering days.

    • Controller swap and wiring

    • Rain and freeze sensors

    • Schedule set to watering days

  • Leaks and low pressure

    Water pooling, a wet curb, or weak spray at the far end of a zone: Roderick finds the broken line or the stuck valve and repairs it.

    • Broken lateral and main lines

    • Valves stuck open

    • Weak spray at the end of a zone

  • Backflow testing

    A yearly test of the assembly that protects your drinking water, with the report your water utility asks for, and a repair if it fails.

    • Test and written report

    • Repair or replace a failed assembly

    • Freeze cover advice

  • What this shop doesn't do

    New systems, landscape design, sod and drainage grading. Roderick says so on the phone and, when he can, who to call instead.

The year

A year of sprinkler checks in Central Texas

January – February

Freeze nights.

  • Cover or drain the exposed backflow assembly when a hard freeze is forecast

  • Switch the controller to off or rain mode; winter grass needs little water

March – May

Spring check.

  • Run every zone and look for sunk heads, clogged nozzles and wet spots

  • A good time for the yearly backflow test

June – August

Peak heat.

  • Brown stripes usually mean a clogged nozzle or a gap in coverage

  • Follow your city's watering days; they change with the drought stage

September – December

Cooling down.

  • Shorten run times as nights cool

  • Check the rain sensor before the wetter weeks

What moves the price

Four things set the number

The flat fees on the home page are for a standard system. These are the reasons a price goes up.

  • Number of zones

    A service call walks every zone. Eight is the standard; a bigger system takes longer to check.

  • Age of the system

    Old valves and brittle pipe break again near the repair, so Roderick tells you what else is worn.

  • How deep the fault is

    A bad nozzle is minutes. A wire fault under a driveway is a longer day.

  • The parts

    Heads, valves and controllers come in several grades. Roderick texts you the options and the prices.

Questions

Straight answers

What does it cost?

Each service on the home page has a flat fee for a standard system. After the walk-through you get the repair and its price by text before any part goes in.

How soon can you come, and how long does it take?

Lucia gives you the next opening when you text or call. Most repairs take one visit of an hour or two; a buried wire fault can take longer.

Are you licensed?

Roderick holds the two Texas licenses shown at the top of every page: licensed irrigator and backflow prevention assembly tester. Each links to the state's lookup.

What happens at the visit?

He runs each zone from the controller, finds the fault, and texts you the repair and its price. Nothing is fitted until you say yes.

How do I pay?

After the repair, by card or check, or through a payment link Roderick texts you.

What about rain or a freeze?

Light rain doesn't stop a repair. Heavy rain or a hard freeze moves the visit, and in a freeze Roderick tells you whether to shut the system off.

What should I do before you arrive?

Clear the way to the controller and the valve box, put pets inside, and text a photo of the controller screen if you can.

What areas do you serve?

Round Rock and the towns around it, from Georgetown to Pflugerville and north Austin. The service area page lists them all.

Not sure which one it is?

Text a photo and say what you see. You'll hear back with the next step.

Roderick or Lucia answers, in English or Spanish.